Bibliography

From ConTeXt wiki
Revision as of 05:37, 11 August 2014 by Thangalin (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

< Modules | Bibliographies in mkii | Bibliographies in mkiv | sample bib file >

Please note that this information is relevant to mkii. If you are using mkiv, see Bibliography_mkiv.

The bib module provides the \cite and \placepublications commands, in addition to some setup commands, for collecting and referencing bibliography. Single references can be supplied by special commands, or by using BibTeX databases.

As of Context 2005.01.13, this module is part of the standard distribution. The current version is also on the modules:bib page (Hans picks up the zip from that location as well, so the current version will always be in the modules part of the ConTeXt distribution).

The PDF manual can be found on the bib module manual page or in your ConTeXt installation. For me (ConTeXt installed in my home directory), it's in ~/texmf/doc/context/bib/bibmod-doc.pdf. Read this manual, it is much more complete than this page!

Contents

Example of use with bibtex

Bibtex support is integrated in texexec you just have to set up the database name.

Assuming you have saved this bit of code as bibdemo.tex:

\usemodule[bib]
\usemodule[bibltx]
\setupbibtex[database=xampl]
\setuppublications[numbering=yes] % Show reference numbers in the generated list.
\starttext
As \cite[article-full] already indicated, bibtex is a \LaTeX-centric program.
\completepublications
\stoptext

Then you just have to run the following command:

texexec bibdemo

To get the typeset result. xampl.bib is a bibtex file example coming with the bibtex distribution (it should be on your harddisk somewhere already: on my teTeX 3.0 system, /usr/share/texmf-tetex/bibtex/bib/base/xampl.bib is the location), in which the article-full key is referred.

The \usemodule[bibltx] line is needed because xampl.bib uses LaTeX commands and defines them using LaTeX syntax. The bibltx module allows ConTeXt to understand some such constructions (which is enough for it to work with xampl.bib).

Note: Since Bibtex is added to the context core, no external module is necessary. It is sufficient to type for example (minimal):

\setupbibtex[database=bib]

\starttext
\completepublications
\stoptext

Changing the way you show the publication list

If you use bibtex and you want to change the way you show the publication list you might want to look at the following example, it will change the publication list showing the surname in uppercase.

(Credits go to Taco Hoekwater)

%D Copied from \invertedshortauthor, with an extra \uppercase
%D \type{#1} = firstnames
%D \type{#2} = von
%D \type{#3} = surname
%D \type{#4} = inits
%D \type{#5} = junior

\unprotect\def\UCauthor#1#2#3#4#5%
   {\bibdoif{#2}{#2\bibalternative\c!vonsep}%
    \uppercase{#3}\bibalternative\c!surnamesep    
    \bibdoif{#5}{#5\bibalternative\c!juniorsep}%
    \bibdoif{#4}{#4\unskip}}
\protect

After that, you can do:

\setuppublicationlist
    [artauthor=\UCauthor,
     editor=\UCauthor,
     author=\UCauthor]

Active URLs

If you want active (clickable) URLs in the references, you need to do a few steps. [Thanks to Tobias Burnus for the working minimal example, which I've modified only slightly.]

The minimal example is in File:Biburls.zip, which includes the patched t-bib.tex. But here are the details of steps 2 and 3. A bibtex book entry using the url field looks like:

@Book{HPL2000,
  editor =	 {John D. Barnsford and Ann L. Brown and Rodney R. Cocking},
  title = 	 {{How people learn: Brain, mind, experience, and school}},
  publisher = 	 {National Academy Press},
  year = 	 2000,
  address =	 {Washington, DC},
  edition =	 {expanded},
  url =		 {http://www.nap.edu/}
}

The modified \setuppublicationlayout, which goes into an environment file or in the preamble of the .tex file, includes lines to use the url field. Since I use the num style for the publication list, with \setuppublications[alternative=num], I take the book layout from the bibl-num.tex source file and modify it by adding two lines:

\unprotect
% copied from bibl-num.tex and added
% \inserturl and \insertdoi
\setuppublicationlayout[book]{%
   \insertauthors{}{\unskip. }{\inserteditors{}{\unskip, editor%
                         \ifnum\getvalue{editor@num}> 1 s\fi.%
                             \ \global\editedbooktrue 
                     }{\insertthekey{}{\unskip. }{}}}%
   \inserttitle
        {\bgroup\it }%
        {\/\egroup 
         \ifeditedbook.%
           \global\editedbookfalse
           \insertvolume
                { Number~}%
                {\insertseries
                    { in~\bgroup}%
                    {\egroup. }%
                    {\insertcrossref{ in~}{}{. }}}%
                {\insertseries{ }{.}{} }%
        \else
       \insertcrossref
        {\insertchap{, }{}{}%
         \insertpages{, pages }{. }{. }%
         \insertvolume{Volume~}{ of~}{}%
         }%
        {}%
        {\insertvolume
                   {, volume~}%
                   {\insertseries
                      { of~\bgroup\it}%
                      {\egroup}
                      {}}
                   {}%
                   \insertchap{, }{}{}%
                   \insertpages{, pages }{.}{.}%
                }%
        \fi}%
        {}%
   \insertpublisher
    { }%
    {\insertedition{, }{ edition}{}%
     \insertpubyear{, }{.}{.}}%
    {\insertedition{, }{ edition}{}%
     \insertpubyear{, }{.}{.}}%
   \insertpages{ }{p.}{}%
   \insertdoi{ }{.}{}%added
   \insertbiburl{ }{.}{}%added
   \insertnote{ }{.}{}%
}
\protect

When running 'texexec', check the terminal output (or logfile) to ensure that texexec finds the modified t-bib.tex (which I have been keeping in the current directory) rather than the system-supplied t-bib.tex. Once the patched t-bib.tex becomes the official release (Taco says sometime in May 2007), that step won't be necessary.

Superscript Citations

Cross-referenced citations can be raised in the text using the \raisebox command:

 % Superscript citation cross-references.
 \setupcite[num][
   left=\raisebox{1ex}\hbox\bgroup\tfxx,
   right=\egroup,
 ]

Other tips

\placepublications[criterium=all]
\def\onlinecite{\cite[left=,right=]}

\onlinecite[myRef]
\cite[extras={, page 275}][your-book-reference]
 month=jan,
 month=feb,

etc. This allows the style file to choose how to display months. By default, the bib module does not do any conversion of the months. This causes the months to turn up as digits. If you want months to come in words add

\setuppublications [monthconversion=month] %or month:mnem

What can I do, if entries are not shown?

Check if a jobname.bbl - file is generated. If it is empty, try manually running

 bibtex <filename>

In case of an error message like I couldn't open style file cont-no.bst, you can try

 mktexlsr

in root terminal. Bibtex uses LS-R to find these files.


C O N T E X T G A R D E N

Personal tools
Namespaces
Variants
Actions
Help
External Help
Installation
Navigation
Toolbox