Changes

< {{note|You almost certainly want to [[Installation]] | '''[[ConTeXt Minimals/Tree]]''' | [[ConTeXt Minimals/Structure]] | [[ConTeXt Minimals/Implementation]] | [[ConTeXt Minimals/TODO]] | [[install the newer ConTeXt Minimals/ContentsLMTX]] >. This guide is for installing the older, rarely-updated MkIV distribution.}}

The distribution is hosted on '''http://minimals.contextgarden.netConTeXt suite''' (equivalent is a complete, up-to '''rsync://contextgarden-date ConTeXt distribution that can be upgraded efficiently.net/minimals/''')It can also be used in parallel with existing TeX installations such as MikTeX, TeXLive, and so forth. You need to have '''rsync''' installed. For windows, a binary of rsync is available as part of the minimal distributionThe suite does not include LaTeX packages and binaries.

{{TOClimit|limit== Linux/Mac/FreeBSD/Solaris ==1}}

=== Prerequisites ==General Information =

You need '''rsync''', '''ruby''', around 200 MB free disk space (might change with time) and one of supported == Supported platforms (see below).==

{| style="border:1px solid #DDDDDD;"|- align="left" ! Platform! Short name! Notes|- align= "left" style="background-color:#EEEEEE;"! Windows| mswin| from [http://w32tex.org W32TeX]|- align="left"! Windows/CygWin| cygwin| same binaries as mswin|- align="left" style="background-color:#EEEEEE;"! Windows, 32 bit| win32| Alias for mswin|- align="left"! Windows, 64 bit| win64| |- align="left" style="background-color:#EEEEEE;"! Linux, 32-bit| linux| Debian 8|- align="left"! Linux, 64-bit| linux-64| Debian 8|- align="left" style="background-color:#EEEEEE;"! Linux, ARM (low end.)| linux-arm| Raspbian 8|- align="left"! Linux, musl| linuxmusl-64| Alpine|- align="left" style="background-color:#EEEEEE;"! Mac OS X, Intel (64-bit)| osx-64| Mac OS X 10.6|- align="left"! FreeBSD, 32-bit| freebsd||- align="left" style="background-color:#EEEEEE;"! FreeBSD, 64-bit| freebsd-amd64||- align="left"! OpenBSD 6.4, 32-bit| openbsd6.4||- align="left" style="background-color:#EEEEEE;"! OpenBSD 6.4, 64-bit| openbsd6.4-amd64||- align="left"! OpenBSD 6.5, 32-bit| openbsd6.5||- align="left" style="background-color:#EEEEEE;"! OpenBSD 6.5, 64-bit| openbsd6.5-amd64||- align="left"! Solaris, Intel| solaris-intel| Solaris 10 on [http://www.opencsw.org/about/ OpenCSW]|- align="left" style="background-color:#EEEEEE;"! Solaris, Sparc| solaris-sparc| Solaris 10 on [http://www.opencsw.org/about/ OpenCSW]|} * If you run into problems installing, check the available architectures in the minimal’s [http://minimals.contextgarden.net/setup/ setup folder]!* OpenBSD 6.4 binaries are compiled but are missing in the setup folder ATM (2019-07) If you want to support a new platform, please write to the [[Mailing Lists]] == Dependencies ==* Rsync (The windows binary of rsync is distributed within the suite)  The following programs are not required for running ConTeXt, but their installation adds additional functionality. * curl : for including remote content* ghostscript : for converting PostScript images to PDF* graphicsmagick (convert) : for converting GIF and TIFF images* inkscape : for converting SVG and compressed SVG* mupdf (mudraw) : for converting PDF to PNG (used for ePub covers)* pstoedit : for converting PostScript to MetaPost outlines* zint : for providing barcodes* zip or 7zip : for EPUB generation == Disc space required ==ConTeXt macro files are small (less than 10MB), but the suite comes with various free fonts which considerably increase the size of the distribution (to around 200MB). == Multiple instances of the installation ==Please note from the start that we recommend installing a complete ConTeXt installation for each project in a production environment. The installation tree is portable (see Moving the Installation Around, below) and can be located under the project's own directory. The advantage is to allow each project to use an instance of ConTeXt that is adapted to its coding and that only gets updated purposely. Since the ConTeXt Standalone is "bleeding edge" and subject to development, certain details in commands, syntax or rendering may evolve slightly. Having a vintage ConTeXt tree for each production project insures that one can come back years later and produce identical results. So as not to get carried away under this approach, one can eventually group projects by vintage, period or season, according to cycles of productivity. ==Standalone == * [[ConTeXt Standalone/FAQ|Standalone/FAQ]] * [[ConTeXt Standalone/Structure|Standalone/Structure]] * [[ConTeXt Standalone/Implementation|Standalone/Implementation]]* [[ConTeXt Standalone/TODO|Standalone/TODO]] * [[ConTeXt Standalone/Contents|Standalone/Contents]] * [[ConTeXt Standalone/TeX Live|Standalone/TeX Live]]* Browse the [http://minimals.contextgarden.net installation tree]   = Unix-like platforms (Linux/MacOS X/FreeBSD/Solaris) = === (MacOS X) Using the Command line: Terminal.app === If you do not what a command tool is, do not worry. It is simply a program in which commands are entered as text and then executed. The needed Terminal.app can be found in the Utilities-folder of the Applications-Folder. Once you have started Terminal, all you have to do is enter a command and press the RETURN-key and the command will be executed.  == Single user installation == Select a folder where you want to install ConTeXt. We recommend that you can use your <code>$HOME/context</code> directory. Create this folder. Then download and place it in <code>$HOME/context</code> directory. Open a terminal, then ... execute (Linux/FreeBSD/Solaris): {{note|You almost certainly want to [[Installation|install the newer ConTeXt LMTX]]. This guide is for installing the older, rarely-updated MkIV distribution.}}

Go to a folder where you want to put ConTeXt. We'll assume installation into <codepre> mkdir ~/context cd ~/context< wget http://code>, but you can install it anywhere where you have writing permissionsminimals.contextgarden. You can install several copies to several places without interferencenet/setup/first-setup. sh''(Mac users can also take a look at [[ConTeXt Minimals</Mac Installation]].)''pre>

or (MacOS):<pre> mkdir ~/context && cd ~/context rsync -ptv av rsync://contextgarden.net/minimals/setup/first-setup.sh . </pre>Since the Mac does not have `wget` pre-installed./ Now run the `first-setup.sh` script:''... <pre> # Install the latest beta of ConTeXt # This takes a long time, so go and have a coffee # Flags you can add to the first-setup...''sh call: # --modules=all # Install all third-party modules # --context=latest # Install latest stable version # --engine=luatex # Install only MkIV, leave out MkII # # This shrinks the install from 270 MB to 200 MB

sh ./first-setup.sh --modules=== Usage: permanent ===all</pre>

Put A system wide installation is '''only''' recommended for experienced users. You will need administrator rights on the following line Mac as only administrators are allowed to <code>~/.bash_profile</code> install programs in the Applications folder, or <code>~/.bashrc</code>: source ~/context/tex/setuptex ~/context/texroot (tsudo)csh users can use the variant: source ~/context/tex/setuptexprivileges on other unix-like systems.csh

In theory it should already suffice to add * on Linux you can use <code>export PATH=~/opt/context</tex/texmf-code>* on MacOS X you can use <platformcode>/bin:$PATHApplications/ConTeXt</code>.

=== UsageNote that, at present, while ''using'' MkIV, you need to have write permissions for the <code>$TEXMFCACHE</code> directory. This effectively means that only one user will be able to generate the formats unless you set the group permissions appropriately. For example: temporary ===

Just type {{note|You almost certainly want to [[Installation|install the newer ConTeXt LMTX]]. ~/context/tex/setuptex ~/context/texto switch from systemThis guide is for installing the older, rarely-wide TeX updated MkIV distribution to the minimals inside current shell.}}

<pre> # Create the /opt/context directory -- change as appropriate or desired if you # want a different installation directory. cd /opt mkdir context cd context # Fetch the install script (use rsync on the mac, see above) wget http://minimals.contextgarden.net/setup/first-setup.sh # Install the latest beta of ConTeXt # This takes a long time, so go have a coffee # Flags you can add to the first-setup.sh call: # --modules=all # Install all third-party modules # --context=latest # Install latest stable version # --engine= Updating ===luatex # Install only MkIV, leave out MkII # # This shrinks the install from 270 MB to 200 MB

For now just run <code> sh ./first-setup.sh</code> again. This will change - the name is not most self-explanatory at the moment.In theory mtxrun --script updateshould work, but it has not been tested yet.modules=all

To customize the cache directory and other options, see the [[Custom_Configuration|Custom Configuration]] page. ===Font Directory=== Add the OSFONTDIR into ./tex/setuptex. Go to under the line:  # TODO: we could set OSFONTDIR on Mac for example (if you don't have the line above, go to the end of the file) and add there:  export OSFONTDIR="/usr/local/share/fonts;$HOME/.fonts" For more information: [[Fonts in LuaTeX]] == Apache webserver installation == Another common use case is invoking ConTeXt from within a web application. Because web directories are often self-contained, and in the case of Apache under Ubuntu, ownership of the directory and its contents are assigned to a user and group without a login shell, e.g., <code>www-data:www-data</code> this prevents a web application from invoking a ConTeXt installation done using either the single-user or system-wide method listed above. In this case the solution is to install ConTeXt within the website tree, and ideally in the public sub-tree. The public sub-tree is commonly the home directory for the application and relative pathnames are resolved as if immediately below it. For example, in the case of the PHP web framework Laravel, ConTeXt can be installed alongside other assets in the <path-to-document-root>/public/context directory: <pre> cd <path-to-document-root>/public mkdir context cd context wget http://minimals.contextgarden.net/setup/first-setup.sh # Install the latest beta of ConTeXt # This takes a long time, so go have a coffee # Flags you can add to the first-setup.sh call: # --modules=all # Install all third-party modules # --context=latest # Install latest stable version # --engine=luatex # Install only MkIV, leave out MkII # # This shrinks the install from 270 MB to 200 MB  sh ./first-setup.sh --modules=all</pre> Once installed, you need to ensure that the permissions are correct for Apache to be able to access it (you will either need <code>sudo</code> privileges or root access): <pre>$ cd <path-to-document-root>/public$ sudo chmod -R www-data:www-data context</pre> Now as part of your application's invocation of ConTeXt, you will need to set up the shell environment. This is easily done by creating a simple BASH shell script, also to be installed in the public part of the document tree: <pre> #!/usr/bin/env bash  # # proccontext.sh # # To be installed in <path-to-document-root>/public/bin  . <path-to-document-root>/public/context/tex/setuptex <path-to-document-root>/public/context/tex  cd tex/spool context $1 > /tmp/context_run.log</pre> Here the dynamically generated ConTeXt source file is expected to be found in the <code><path-to-document-root>/tex/spool</code> directory. Now within your application, you can invoke this shell script (in this case using PHP): <pre> $cmd = "bin/proccontext.sh $input_filename"; $last_line = system($cmd, $ret_val);</pre> And the output will once again be found in <code><path-to-document-root>/tex/spool</code>. ==Arch Linux==There’s a [https://aur.archlinux.org/packages/context-minimals-git PKGBUILD] inthe AUR, provided by Aditya [https://github.com/adityam/context-pkgbuild].Install it using your favorite AUR frontend, e.g. <pre>yaourt -S context-minimals-git</pre> This will get you a fresh, up-to-date Context tree in<tt>/opt/context-minimals</tt>. == The funtoo way == If you are using [http://funtoo.org funtoo] there are ebuilds that will make an installation as easy as installing any other package from portage. Take a look at the [[ConTeXt Standalone Funtoo]] Howto. This might also work for [http://www.gentoo.org gentoo], but is untested right now. == Proxy settings == The installation script uses <code>rsync</code> to fetch the required files. So, if you are behind a proxy server, you need to tell the details to rsync. The easiest way to set this is to set <code>RSYNC_PROXY</code> variable in the terminal or your startup script (<code>.bashrc</code> or the corresponding file for your shell). Replace username, password, proxyhost and proxyport with the correct information  export RSYNC_PROXY=username:password@proxyhost:proxyport Sometimes, when behind a firewall, port 873 may be closed for outgoing TCP connections. If port 22 is open for ssh connections, a trick that can be used is to connect to a computer located somewhere outside of the firewall and to tunnel port 873 (using the program <code>nc</code>).  export RSYNC_CONNECT_PROG='ssh tunnelhost nc %H 873' where <code>tunnelhost</code> is the machine outside of the firewall on which you have <code>ssh</code> access. Of course, this machine must have <code>nc</code> and port 873 open for outgoing TCP connections. == Usage == ConTeXt suite works in a non-interfering manner because it does not put anything in your <code>$PATH</code> and does not set any system variables. This in turn means that in order to use it, you need to do some initialization. An intialization script called <code>setuptex</code> is provided in <code>installation-dir/tex/</code>.  === Terminal/Command line === To run context from a terminal, source <code>setuptex</code>:  source /installation-dir/tex/setuptex === Exclusive usage === If you always use ConTeXt suite and '''never''' use LaTeX or plain TeX provided by another TeX distribution, you can add the following line to the startup script of your shell (For bash, the startup script is <code>$HOME/.bashrc</code>; for zsh it is <code>HOME/.zshrc</code>).  source /installation-dir/tex/setuptex Then <code>setuptex</code> will always be sourced in your terminal. === Integrating with an editor === The easiest way to run ConTeXt from an editor is to open a terminal, source {{code|setuptex}} in the terminal, and then open your editor '''from the same terminal'''. Another option is to add {{code|/installation-dir/tex/texmf-<platform>/bin}} to the {{code|$PATH}} that the editor searches. The details vary depending on the editor. See [[Text Editors]] for instructions on integrating ConTeXt with various editors. == Updating == For updating the ConTeXt suite, first update <code>first-setup.sh</code>, then run it. You couldalso create an alias or a little script “ctx-update”with the following example contents:<pre>cd /opt/contextrsync -ptv rsync://contextgarden.net/minimals/setup/first-setup.sh .sh ./first-setup.sh --modules=all</pre> To update retain currently-installed modules:<pre>sh ./first-setup.sh --keep</pre> == Uninstalling == ConTeXt suite does not touch anything outside its installation folder. So to uninstall it, you can simply remove the installation folder. == Remaking formats === Normally, the update script should create the formats for you. If for some reason you need to recreate the formats, you can do the following: * For making MKII format.

texexec --make --all en de texexec --make --xtx --all en de luatools --generate context --make en de* For making XeTeX format

Slides from author's presentation can be downloaded [http:If you want to use ConTeXt suite alongside MikTeX//meeting.contextgarden.net/2008/talks/2008TeXLive (needed if you also run LaTeX), follow the command-08-21-vyatcheslav-win-installer/windows_installer.pdf here]line installation method.

=== Installation: local & command-Command line method ===Download [http://minimals.contextgarden.net/setup/context-setup-mswin.zip context-setup-mswin.zip] or [http://minimals.contextgarden.net/setup/context-setup-win64.zip context-setup-win64.zip], and unzip to a directory where you want to install ConTeXt. It is recommended that you choose a directory that does not have a space in its full path. Then open <code>cmd.exe</code>, go to the installation directory and run

''(For those who need MikTeX/TeX Live and are comfortable with command{{note|You almost certainly want to [[Installation|install the newer ConTeXt LMTX]]. This guide is for installing the older, rarely-lineupdated MkIV distribution.)''}}

Download and unzip [http://minimals.contextgarden.net/setup/context-setup-mswin.zip context first-setup-mswin.zip]bat

Run <code>first-setup.bat</code>This takes a long time, so go for have a coffee.

Before being able to use By default, the suite installs ConTeXt beta. If you need to run setuptex.bat to initialize want the environment. A simple way to do it is to create a file <code>startcontext.bat</code> (stable version of ConTeXt, you can use any name) somewhere in PATH and put this line into it

C:\Programs\context\tex\setuptex first-setup.bat C:\Programs\--context\tex=latest

ThenBy default, the suite does ''not'' install modules and other third party content. If you want the modules (and have the bandwidth), you can type <code>startcontext</code> into CMD whenever you want to use ConTeXt Minimals instead of MikTeX.

Another method is to create a shortcut to cmd.exe and edit the command line to read C:\WINDOWS\System32\cmd.exe /k C:\Programs\context\tex\setuptexfirst-setup.bat C:\Programs\context\texThis starts up a new command shell with the environment pre-loaded.-modules=all

The minimals contain set RSYNC_PROXY=username:* '''ConTeXt'''password@proxyhost: current, beta + some older releases* '''Fonts''': most important TeX-aware ones* '''Binaries''': latest version of pdfTeX, XeTeX, LuaTeX, Metapost* '''Formats''' (need to be generated by user) for** ConTeXt, mptopdf and plain TeX for pdfTeX/XeTeX/LuaTeX** metafun and plain for Metapostproxyport

See [[ConTeXt Minimals/Contents]]or set the variable permanently as a Windows environment variable.

export RSYNC_CONNECT_PROG=== What to install ===* --'''platform'''=''name-of-platform'' (see supported platforms; default: the one we are working on)* --'''engines'''=''list-of-engines'' (options: luatex, xetex, pdftex, all; default: '''all''')* --'''context'''=''version'' (options: current, beta, alpha, ''yyyy.mm.dd''; default: '''beta''ssh tunnelhost nc %H 873')

=== What to do ===* --'''force''' (as opposed to --dryrun; do where <code>tunnelhost</code> is the machine outside of the real thing; this is '''needed''') ''needs to be fixed''* --'''update''' (update minimal tree)* --'''make''' (make formats and generate file databases)* --state (update tree using saved state) ''needs to be implemented/fixed''* --keep (as apposed to --delete; don't delete unused or obsolete files) ''needs to be improved''=== Where to install ===* --'''texroot'''=''path'' (installation path; default: '''tex''')=== Rsync Server ===''(currently there's only one anyway)''* --'''server'''=''repository-url'' (default: '''firewall on which you have <code>rsync:ssh<//contextgardencode> access.netOf course, this machine must have <code>nc</code>''')* --'''module'''=''string'' (default: '''minimals''')* --'''rsync'''=''name-of-rsync-binary'' (default: '''rsync''') ''Why do we need this?''and port 873 open for outgoing TCP connections.

= Supported platforms = Usage ==

{| style="border:1px solid #DDDDDD;"Before running ConTeXt, you need to run <code>setuptex.bat</code> which is provided in <code>installation-dir\tex\</code>. This can be done by typing | installation- align="left" style="background-colordir\tex\setuptex.bat on cmd.exe before you run ConTeXt. To avoid always having to type this, you can create a shortcut to cmd.exe and edit the command line to read (assuming you installed the suite in <code>C:#EEEEEE\Programs</code>;"otherwise replace <code>C:\Programs\</code> with your installation directory) ! Windows C:\WINDOWS\System32\cmd.exe /k C:\Programs\context\tex\setuptex.bat| mswin| Akira Kakuto (W32TeX)This starts up a new command shell with the environment pre-loaded. Within the new shell you can just type <code>context</code> to run ConTeXt. E.g.|| C:\> context -- alignversion to check that you are running the version you think you're running. ="left"== Use ConTeXt with Cygwin ===After installing the ConTeXt suite, you can run it under Cygwin. With Cygwin, you may use gmake and other Unix tools for your automated workflow.! Linux| linux# Run <code>setuptex.bat</code> in DOS command prompt| contextgarden# In the same DOS prompt, enter Cygwin by running <code>cygwin.netbat</code> (in your Cygwin installation directory)| compiled with glibc 2# Under Cygwin prompt, run <code> context.cmd test.tex </code>. Note that the <code>.3cmd</code> extension is needed under Cygwin.6|- align== Updating ="left" style="background-color:#EEEEEE;"! LinuxIf you used the command line method, 64just run <code>first-bitsetup.bat</code> again to update the suite.| linux == Uninstallation == If you used the command-64line installer, you can just delete the installation directory to uninstall the suite.  == Troubleshooting ==| Peter Münster| we consider renaming it to linux* rsync sometimes has problems with paths with uppercase letters (like <code>c:\Temp</code> or <code>C:\Documents and Settings</code>). Installing into all-amd64lowercase paths without spaces sometimes helps.|* Directory- align=name length may also have an effect, due to Windows's 8.3 filename conventions. An indicator is if running "lefttexexec --lua"! Linux, PowerPC| linuxon a file produces missing-file warnings containing Windows-ppc| Piotr Kopszak||created 8- align=character directory names, such as "C:\CONTEX~1\tex", where your ConTeXt directory is really "leftC:\context_minimals\tex" style=. Be conservative and choose a short name like "background-colorC:#EEEEEE;\ctm\tex"! Mac OS X. Also, Intel| osxthis may even work when an 8-character-intel| Mojca Miklavec||or- align=less directory name like "leftC:\ctexmin\tex"doesn't.! Mac OS X* If you're behind firewall and rsync times out, PowerPCyou need to open port 873 for outgoing TCP connections.| osx-ppc* If you update luaTeX occasionally you may get something like | Mojca Miklavec||<code>engine mismatch (luv: This is LuaTeX, Version beta- align="left" style="background<version>-color<date1> (TeX Live 2013/dev)(rev <number1>) <> bin:#EEEEEE;"This is LuaTeX, Version beta-<version>-<date1> (TeX Live 2012/W32TeX)(rev <number2>)), forcing remake</code>! Mac OS X, Universal Binaries| osxIn which case your format will be remade every time you compile a file. In /texmf-universalmswin make sure that luatex.exe and texlua.exe have the same date; then also delete luatex.dll. This usually solves the problem.| Mojca Miklavec||- align="left"Installing third party modules =! FreeBSDThe ConTeXt suite only comes with Taco's [[Bibliography| freebsdt-bib]] module. If you want to install [http://modules.contextgarden.net/ a new module], say Wolfgang's [[Letter| Yue Wangt-letter]] module, Diego Depaoliyou can use| we consider renaming it to freebsd first-setup.sh -intel|- align="left" stylemodules="backgroundt-color:#EEEEEE;letter"! FreeBSDIf you want to install more than one extra module, AMD64you can separate them by commas. So, to install the t-letter and t-mathsets module, do| freebsd sh ./first-setup.sh -amd64| Michael Krauß| |- alignmodules="leftt-letter,t-mathsets"! SolarisIf you want to install all extra modules at once, Inteldo| solaris sh ./first-setup.sh --intel| Michael Kraußmodules=all||- align="left" styleReverting to an older installation ="background-color:#EEEEEE;"! SolarisIf, Sparcfor some reason, you want to revert to an older installation, you can do that by| solaris sh ./first-setup.sh --sparccontext=date where <code>date</code> is the date of one of the stable releases of ConTeXt. The complete list of old releases that are available is [http://minimals.contextgarden.net/current/context/ here].| Vladimir Volovich| compiled on solaris 8|}= Moving the installation tree around =

[[CatergoryCategory:MinimalsStandalone]]